Stages of Making a Saltwater Aquarium for Beginners



Stages of Making a Saltwater Aquarium for Beginners. Seawater aquariums are increasingly loved by Indonesians as a sweetener for the appearance of the room. The reason is that the types and colors of fish and marine plants that can be kept are more diverse and interesting to look at. The colorful fish, the decorations in them, and the shape of the aquarium itself are some of the reasons for choosing them.

5 Stages to Make A Sea Water Aquarium For Beginners

Sea Water Aquarium Tank Selection
Determining the size of the seawater aquarium tank should not be arbitrary. It is highly recommended to use a tank with a minimum capacity of 55 gallons of water (217 liters). The bigger the capacity, the better, but of course the price is more expensive. Its thickness also needs to be considered so that it is suitable and can withstand such a large amount of water. The shape can be modified, but it must match the type of lamp that will be installed later.

Sea Water Aquarium Tool
Before being decorated and adding water, the tank must also be equipped with a powerhead as a water flow generator. These artificial water currents are very useful for making marine life habitats as natural as possible, especially if there are coral reefs in them. Use the size and current strength according to the volume of water used in the saltwater aquarium. An aquarium sump should also be made to filter any dirt and food scraps from later pet fish. This section can be made in the aquarium using a glass partition or made separately from the main aquarium.

Usable Water
The water used, of course, should use natural sea saltwater. Because natural seawater contains plankton which is very useful as clothes for marine fish. Natural sea salt water can be found easily in specialty stores that sell ornamental fish and all aquarium equipment. Making saltwater for this type of aquarium can be done. The trick is to mix tap water with pure salt purchased at a chemical store. Remember! This seawater must be replaced periodically, which is about once every three to four weeks. The normal temperature of the seawater aquarium must be maintained, which is around 28 degrees Celsius.

Sea Water Aquarium Landscape
The setting of the saltwater aquarium landscape is always amazing. Before filling with seawater, install all the equipment needed by the aquarium. After that the seawater aquarium system using coarse and fine sea sand as the base. Then plant live coral and sea plants or anemones in it. In the next stage, after everything is according to the desired design, then slowly enter the seawater until it approaches the lip of the aquarium.

Types of Fish for a Seawater Aquarium
Some types of ornamental sea fish that can be kept easily are clownfish or what is often called Nemo fish, blue and yellow tang, angelfish, lionfish, and butterflyfish. Let the seawater mix and unite using a powerhead for approximately four weeks so that the conditions are suitable for habitation. After about a month, prepare the desired ornamental fish and put them in the aquarium along with the plastic wrap. This is done so that the temperature match between the fish and seawater that has been in the aquarium before. Let the plastic filled with the fish float for about 20 minutes. Then, open the plastic straps and let the water in the tank join the plastic.

All these stages should be prepared to make your saltwater aquarium ready to use. Many kinds of creatures can live happily inside the aquarium. Don’t forget to constantly feed the fish and clean the reef tank. Enjoy your aquarium view!

Leave a Reply

Your email address will not be published. Required fields are marked *